Soffit Replacement FAQ, Orlando FL

Common signs are sagging or loose panels, soft or rotting wood, peeling paint, water stains, gaps, holes, and bees, birds or rodents going in and out. If you see daylight or nesting material near the overhang, have it looked at. Many problems start small and get worse after a storm.

Often, yes. If the damage is limited to a few panels and the wood behind them (the fascia and rafter tails) is sound, a section can usually be repaired. If rot or water damage has spread, or the old material can’t be matched, full replacement along that side of the house may make more sense.

Vinyl and aluminum are popular in Florida because they don’t rot and handle humidity well. Wood can look great but needs regular painting and is more likely to rot in our climate. The best choice depends on your home’s style, your budget and what’s there now. In most cases we replace like for like, so the new soffit matches what’s already on your home.

Cost depends on the materials and how many linear feet need work. As a rough guide, a full soffit replacement is generally about $10 to $15 per linear foot. We usually repair or replace only the damaged sections, and we only recommend replacing all of the soffit when most of it is damaged. Every job is priced on its own, so the best way to get a real number is a free estimate.

Yes. We can replace just the soffit. Fascia is separate, and it’s also generally about $10 to $15 per linear foot.

Fascia is priced separately from soffit. As a rough guide, it’s generally about $10 to $15 per linear foot.

Repairing only the damaged areas usually takes a couple of hours. Replacing all of the soffit on a home usually takes about 1 to 2 days. Jobs where rotted fascia also has to be replaced can take longer. We’ll give you a time estimate before work starts.

It’s often a good time to do it, because crews are already working at the roof edge and can check the fascia, drip edge and ventilation together. Doing it together can also help the finished roof edge look uniform. It’s not required, though, if your soffit is in good shape.

Florida attics can get extremely hot. Good soffit intake vents, paired with exhaust vents higher on the roof, help move hot, damp air out of the attic. That can help protect your roof decking and shingles and make it easier for your AC to keep up.

As a rough guide, it’s often about $20 per linear foot, but every job is priced on its own, depending on the type of soffit and whether it’s on the first or second floor.